WT00Z5-1

Z-Wave Smart 3-Way Switch/Dimmer

The WT00Z5-1 Wall Mount Accessory Dimmer Switch allows remote ON/OFF control and dimming of lights controlled by associated Z-Wave modules, creating virtual 3-way switches. The WT00Z5-1 controls no load directly, so it can be wired anywhere power is available, without the need for a traveler wire.

Replaceable Trim Ring

The WT00Z5-1 3-Way Wall Mount Accessory Dimmer/Switch has a field replaceable trim ring – the color of the device can be altered with the Trim Ring Kit model in black, brown and almond.

Note to Installers: When installing a Z-Wave 3-Way Light setup utilizing Nice North America products, you will need a Load Bearing switch (WS15Z-1, WD500Z-1 or WD1000Z-1) and a non-load bearing WT00Z-1. Multiple WT00Z-1 switches can be utilized to control multiple Load Bearing devices. Please refer to the linked Technical Bulletin on Z-Wave 3-Way Light Switch Setup for more information.

WARNING: This product can expose you to chemicals including 1,3-Butadiene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

 

Contact us for technical manuals or to be connected with an authorized dealer of 2GIG in your area.

 

Specifications

  • Signal (Frequency): 908.42 MHz
  • Load: does not directly control a load. Another Z-Wave device is required
  • Range: Up to 100 feet line of sight between the controller and/or the closest Z-Wave device
  • Network wide inclusion
  • Connect up to 5 devices to create virtual 3,4,5,6,7-way operation
  • Requires Minimote
  • Security beaming